用途:用于大型瓷套管切割端面及研磨外圆端面或倒角。

组成:床头箱、左右切割研磨头架、左右溜板箱箱、床身、尾架、过滤装置和电气控制装置等。

特点:由于采用微机控制来完成工艺要求的动作，所以切割、研磨质量高(表面光洁度达Ra μm0.8,端面平面度为0.04mm,两端面平和度为0.08mm),生产效率高，结构合理。

Application: Used for cutting end face of large porcelain bushing and grinding end face of outer circle or chamfering.

Composition: head box, left and right cutting and grinding head frame, left and right slide plate box, bed body, tail frame, filter device and electrical control device, etc.

Features: due to the use of computer control to complete the process requirements of the action, so cutting, grinding quality is high (surface finish up to Ra μ M0.8, the flatness of the end face is 0.04mm, the two end face flat degree is 0.08mm), high production efficiency, reasonable structure.

主要技术参数：